Download Print this page

HP 3100 User Manual: Set The Number Of Copies; Set The Copy Paper Size; Set The Copy Paper Type

Hewlett-packard fax machine user guide.
Hide thumbs

Advertisement

Chapter 4

Set the number of copies

You can set the number of copies that you want to print by using the Number of
Copies option.
To set the number of copies from the control panel
1.
Make sure you have paper loaded in the input tray.
2.
Load your original print side down in the document feeder tray.
Place the pages so that the top edge of the document goes in first.
3.
In the Copy area, press Copy Menu repeatedly until Number of Copies appears.
4.
Press
(The maximum number of copies varies by model.)
TIP:
by increments of 5 to make it easier to set a large number of copies.
5.
Press START COPY Black or START COPY Color.

Set the copy paper size

You can set the paper size on the HP Fax. The paper size you select should match what
is loaded in your input tray.
To set the paper size from the control panel
1.
In the Copy area, press Copy Menu repeatedly until Copy Paper Size appears.
2.
Press
3.
Press START COPY Black or START COPY Color.

Set the copy paper type

You can set the paper type on the HP Fax.
To set the paper type for copies from the control panel
1.
In the Copy area, press Copy Menu repeatedly until Paper Type appears.
2.
Press
3.
Press START COPY Black or START COPY Color.
Refer to the following table to determine which paper type setting to choose based on the
paper loaded in the input tray.
Paper type
Copier paper or letterhead
HP Bright White Paper
HP Premium Plus Photo Paper, Glossy
HP Premium Plus Photo Paper, Matte
40
Copy
or use the keypad to enter the number of copies, up to the maximum.
If you hold down either of the arrow buttons, the number of copies changes
until the appropriate paper size appears.
until the appropriate paper type appears.
Control panel setting
Plain Paper
Plain Paper
Premium Photo
Premium Photo

Advertisement

   Related Manuals for HP HP 3100

   Related Content for HP HP 3100

Comments to this Manuals

Symbols: 0
Latest comments: