Icom ID-5100A Basic Manual page 76

7
MENU SCREEN
Menu items and Default settings (Continued)
■
Scan
Pause Timer
Resume Timer
Temporary Skip Timer
Program Skip
Bank Link
Program Scan Edge
Program Link
See the Full Manual for details of the preset values.
Voice Memo
QSO Recorder
<<REC Start>>*
Play Files*
Recorder Set
REC Mode
RX REC Condition
File Split
*
Be sure to insert the SD card into the transceiver before selecting these items.
63
Set scan options.
2sec~10sec~20sec or HOLD
0sec~2sec~5sec or HOLD
5min, 10min or 15 min
OFF or ON
A: ✔ ~Z: ✔
00~24
Set the TX/RX voice recording options.
PLAY FILES
TX&RX or RX Only
Always or Squelch Auto
OFF or ON
Selects the scan pause time. When receiving signals,
the scan pauses according to the scan pause timer.
Selects the scan resume time from a pause after the
received signal disappears.
Selects the Temporary Skip Time. When the time is
set, specified frequencies are skipped for this period
during a scan.
Turns the Program Skip Scan function ON or OFF for
a VFO mode scan.
Selects banks to be scanned during a Bank Link
Scan.
Sets the frequency ranges for the program scan.
Sets the link function for the program scan edge
channels.
Starts recording the received signal audio.
Plays or deletes the recorded audio.
Selects to record the TX audio or not.
Selects whether or not the squelch status affects the
RX voice audio recording.
Selects whether or not to automatically create a new
file if transmission and reception, or squelch status
(open and close) is switched.