Icom ID-5100A Basic Manual page 88

7
MENU SCREEN
Menu items and Default settings (Continued)
■
System Language
Sounds
Beep Level
Key-Touch Beep
Home CH Beep
Band Edge Beep
Scan Stop Beep
Standby Beep
Sub Band Mute
Scope AF Output
Time Set
Date/Time
DATE
TIME
GPS Time Correct
UTC Offset
Auto Power OFF
75
English or Japanese
Sets the Sound options.
0~9
OFF or ON
OFF or ON
OFF or ON
OFF or ON
OFF, ON or ON (to me:High Tone)
OFF, Mute, Beep or Mute & Beep
OFF or ON
Sets the Time options.
2000/01/01~2099/12/31
0:00~23:59
OFF or Auto
–14:00~±0:00~+14:00
OFF, 30min, 60min, 90min or
120min
Selects English or Japanese as the system language
of the transceiver.
Sets the beep output level.
Turns the confirmation beep tones when key is
pushed, ON or OFF.
Turns the Home CH Beep ON or OFF.
Turns the Band edge beep ON or OFF.
Turns the scan stop beep ON or OFF.
Turns the standby beep function in the DV mode ON
or OFF.
Selects to mute the SUB band audio signal while
receiving on the MAIN band, and/or sound a beep
when a signal disappears on the SUB band.
Selects the audio output option during a sweep.
Sets the current date.
Sets the current time.
Sets to automatically correct the time using a GPS
signal.
Enters the time difference between UTC and the lo-
cal time.
Turns the Auto power OFF function ON or OFF.