Icom ID-5100A Basic Manual page 84

7
MENU SCREEN
Menu items and Default settings (Continued)
■
RX History Log
* 1
CSV Format
Separator/Decimal
Date
Function
Squelch/ATT Select
Squelch Delay
Fan Control
Dial Speed-UP
Auto Repeater
* 3
Remote MIC Key
During RX/Standby
During TX
Up/Down MIC Key
Be sure to insert the SD card into the transceiver before selecting these items.
* 1
The default value may differ, depending on the transceiver version.
* 2
Does not appear, depending on the transceiver version.
3
*
71
OFF or ON
Sep [,] Dec [.] , Sep [;] Dec [.] or
2
*
Sep [;] Dec [,]
yyyy/mm/dd, mm/dd/yyyy
* 2
mm/yyyy
Sets various function's options.
OFF, S-Meter Squelch, ATT
Short, Long
Slow, Mid, Fast or Auto
OFF or ON
OFF or ON (DUP), ON (DUP,TONE) Turns the Auto Repeater function ON or OFF.
[F-1]:BAND/BANK [F-2]:MONITOR
[F-1]:T-CALL [F-2]:---
Selects to make a DV mode's receive history log on
the SD card, or not.
Selects the separator and the decimal character for
the CSV format.
or dd/ Selects the date format.
Selects to use the S-Meter Squelch or the Attenuator
function for the [SQL] control.
Selects to shorten or lengthen the time until the
squelch opens.
Selects the cooling fan control condition.
Turns the dial speed acceleration ON or OFF.
Selects the key function for [F-1] or [F-2] on the sup-
plied remote-control microphone.
Selects the key function to be used while receiving or
in the standby mode.
Selects the key function to be used while transmit-
ting.
Selects the key function for [UP] or [DN] on the op-
tional hand microphone.