Icom ID-5100A Basic Manual page 87

RX Position Display
RX Position Display Timer
Reply Position Display
TX Call Sign
Scroll Speed
Opening Message
Voltage (Power ON)
Display Unit
Latitude/Longitude
Altitude/Distance
Speed
Temperature
Barometric
Rainfall
Wind Speed
Display Language
The default value may differ, depending on the transceiver version.
*
OFF, ON (Main/Sub) or
ON (Main Only)
5sec, 10sec, 15sec, 30sec, Hold
OFF or ON
OFF, Your Call Sign or My Call
Sign
Slow or Fast
OFF or ON
OFF or ON
ddd°mm.mm', ddd°mm'ss"
m, ft/ml*
km/h, mph* or knots
ç, ƒ*
hPa, mb, mmHg, inHg*
mm, inch*
m/s, mph*, knots
English or Japanese
MENU SCREEN
Selects whether or not to display the caller's posi-
tion data in a dialog when the data is included in the
signal received in the DV mode.
Sets the RX position data display time period.
Selects whether or not to display the caller's position
data in a dialog when the data is included in the Auto
Reply signal.
Selects whether or not to display My or Your call sign
while transmitting.
Selects the scrolling speed of the message, call sign,
or other text.
Selects whether or not to display the opening mes-
sage at power ON.
Selects whether or not to display the voltage of the
external DC power source at power ON.
Selects position format to display the position.
Selects units to display the distance and altitude.
Selects units to display the speed.
Selects units to display the temperature.
Selects units to display the barometric pressure.
Selects units to display the rainfall.
Selects units to display the wind speed.
Selects the display language in the DR screen or
Menu mode. When "English" is selected in System
Language, this setting will disappear.
7
7
74