Advanced Settings - LevelOne WAP-0005 User Manual

Wireless Access Point User Guide

Advanced Settings

Clicking the Advanced link on the menu will result in a screen like the following.
Data - Advanced Settings Screen
Basic Rate
Basic Rate
Options
Wireless Separation
Worldwide Mode
(802.11d)
Figure 21: Advanced Settings
The Basic Rate is used for broadcasting. It does not determine
the data transmission rate, which is determined by the "Mode"
setting on the Basic screen.
Select the desired option.
Do NOT select the "802.11g" or "ODFM" options unless ALL
of your wireless clients support this. 802.11b clients will not be
able to connect to the Access Point if either of these modes is
selected.
If enabled, then each Wireless station using the Access Point is
invisible to other Wireless stations. In most business situations,
this setting should be Disabled.
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
40