Security Profile Screen - LevelOne WAP-0005 User Manual

Wireless Access Point User Guide

Security Profile Screen

This screen is displayed when you select a Profile on the Security Profiles screen, and click the
Configure button.
Profile Data
Enter the desired settings for each of the following:
Profile Name
SSID
Wireless Band
Security System
Select the desired option, and then enter the settings for the selected method.
The available options are:
•
None - No security is used. Anyone using the correct SSID can connect to your network.
•
WEP - The 802.11b standard. Data is encrypted before transmission, but the encryption
system is not very strong.
•
WPA-PSK - Like WEP, data is encrypted before transmission. WPA is more secure than
WEP, and should be used if possible. The PSK (Pre-shared Key) must be entered on each
Wireless station. The 256Bit encryption key is derived from the PSK, and changes
frequently.
Figure 11: Security Profile Screen
Enter a suitable name for this profile.
Enter the desired SSID. Each profile must have a unique SSID.
Select the wireless band or bands for this profile. If your Wireless
Access Point only has a single band, then only 1 option is available.
18