Advanced Settings; Network - LevelOne WAP-6121 User Manual

4.3.5 Advanced Settings:

In this page, will show the regional, mode, RF Power, Max user access...

4.3.6 Network:

In network, mainly to show the LAN setting and tag VLAN as follow:
In LAN Settings, mainly including static IP and DHCP.
DHCP from controller means you are allowing controller to manage the IP of the AP and end users. That is to say
only when DHCP from controller is chosen can the controller find and mange the AP.
Static IP means the AP has the right to manage its own IP address. When the IP segment of the AP is same as
P33 MAC Access Control
P34 Advanced Setting
21