Advanced Wireless Setup; Advanced Rf Module1 Settings - LevelOne WAP-6101 User Manual

WPA-6101 300Mbps Wireless Ceiling Gigabit PoE Access Point
Afterwards, click on "Save" to store your settings or click "Undo" to give up the
changes.
3.1.3.2

Advanced Wireless Setup

This device provides advanced wireless setup for professional user to optimize the
wireless performance under the specific installation environment.
3.1.3.2.1

Advanced RF Module1 Settings

1. Beacon interval: Beacons are packets sent by a Access Point to synchronize
wireless devices.
2. Transmit Power: Normally the wireless transmission power operates at 100%
out power specification of this device. You can lower down the power ratio to
prevent transmissions from reaching beyond your corporate/home office or
designated wireless area.
3. RTS Threshold: If an excessive number of wireless packet collision occurred,
the wireless performance will be affected. It can be improved by adjusting the
RTS/CTS (Request to Send/Clear to Send) threshold value.
4. Fragmentation: Wireless frames can be divided into smaller units (fragments) to
improve performance in the presence of RF interference and at the limits of RF