Table of Contents
Advertisement
Wireless Access Point User Guide
Advanced Settings
Clicking the Advanced link on the menu will result in a screen like the following.
Data - Advanced Settings Screen
Basic Rate
Basic Rate
Options
Wireless Separation
Worldwide Mode
(802.11d)
Figure 26: Advanced Settings
The Basic Rate is used for broadcasting. It does not
determine the data transmission rate, which is determined
by the "Mode" setting on the Basic screen.
Select the desired option.
Do NOT select the "802.11g" or "ODFM" options unless
ALL of your wireless clients support this. 802.11b clients
will not be able to connect to the Access Point if either of
these modes is selected.
If enabled, then each Wireless station using the Access
Point is invisible to other Wireless stations. In most busi-
ness situations, this setting should be Disabled.
Enable this setting if you wish to use this mode, and your
Wireless stations support this mode.
48
Advertisement
Table of Contents
