System Advanced Settings Screen - LevelOne WAP-6012 User Manual

System Advanced Settings Screen

Click Advanced Settings on the System menu to view a screen like the following.
Data - System Advanced Settings Screen
VLAN
Enable 802.1Q
VLAN
Native VLAN
AP Manage-
ment VLAN
VLAN List
Network Integrality Check
Enable Net-
work Integrality
Check
LLTD
Enable Link
Layer Topology
Discovery
STP
Enable Span-
ning tree
Protocol
802.1x Supplicant
Enable 802.1x
Supplicant
Figure 8: System Advanced Settings Screen
This option is only useful if the hubs/switches on your LAN
support the VLAN standard.
Enter the desired value for the Native VLAN. Default value is 1.
Define the VLAN ID used for management.
Define the unique ID value (1 - 4094) for each VAP.
If enabled, the AP will disable the wireless connection if the wired
connect of AP is invalid.
Enable this if you want to use Link Layer Topology Discovery
protocol (LLTD) feature.
Enable this if you want to use this feature.
Enable this if your network requires this AP to use 802.X authen-
tication in order to operate.
Access Point Setup
15