LevelOne WAP-0005 User Manual page 34

Wireless Access Point User Guide
Data - WPA-802.1x Screen
WPA-802.1x
Radius Server
Address
Radius Port
Client Login Name
Shared Key
WPA Encryption
Pairwise Key
Update
Key Lifetime
Group Key Update
Key Lifetime
Update Group key
when any
membership
terminates
Radius Accounting
Enter the name or IP address of the Radius Server on your network.
Enter the port number used for connections to the Radius Server.
This read-only field displays the current login name, which is the
same as the name of the Access Point. The Radius Server must be
configured to accept this login.
This is used for the Client Login on the Radius Server. Enter the
key value to match the Radius Server.
Select the desired option. Other Wireless Stations must use the
same method.
•
TKIP - Unicast (point-to-point) transmissions are encrypted
using TKIP, and multicast (broadcast) transmissions are not
encrypted.
•
TKIP + 64 bit WEP - Unicast (point-to-point) transmissions
are encrypted using TKIP, and multicast (broadcast)
transmissions are encrypted using 64 bit WEP.
•
TKIP + 128 bit WEP - Unicast (point-to-point) transmissions
are encrypted using TKIP, and multicast (broadcast)
transmissions are encrypted using 128 bit WEP.
•
AES - CCMP - CCMP is the most common sub-type of AES
(Advanced Encryption System). Most systems will simply say
"AES". If selected, both Unicast (point-to-point) and multicast
(broadcast) transmissions are encrypted using AES.
•
AES - TKIP - If selected, Unicast (point-to-point) uses AES-
CCMP and multicast (broadcast) transmissions are encrypted
using TKIP.
This refers to the key used for point-to-point transmissions. Enable
this if you want the keys to be updated regularly.
This field determines how often Pairwise keys are dynamically
updated. Enter the desired value.
This refers to the key used for broadcast transmissions. Enable this
if you want the keys to be updated regularly.
This field determines how often the Group key is dynamically
updated. Enter the desired value.
If enabled, the Group key will be updated whenever any member
leaves the group or disassociates from the Access Point.
Enable this if you want this Access Point to send accounting data to
the Radius Server.
If enabled, the port used by your Radius Server must be entered in
the Radius Accounting Port" field.
30