LevelOne WAP-0005 User Manual page 96

11g poe wireless access point

Hide thumbs Also See for WAP-0005:

Table of Contents

Wireless Access Point User Guide

5. Ensure your TCP/IP settings are correct.

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. To work correctly, you need a DHCP server on your LAN.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured for a fixed (specified) IP address, no changes are required.

(The Administrator should configure the Wireless Access Point with a fixed IP address from

the same address range used on the PCs.)

Table of Contents