LevelOne WAP-0005 User Manual page 94

11g poe wireless access point

Hide thumbs Also See for WAP-0005:

Table of Contents

Wireless Access Point User Guide

5. Ensure your TCP/IP settings are correct:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default

Windows setting. This is the default Windows settings. To work correctly, you need a DHCP

server on your LAN.

Using a fixed IP Address ("Use the following IP Address")

If your PC is already configured for a fixed (specified) IP address, no changes are required.

(The Administrator should configure the Wireless Access Point with a fixed IP address from

the same address range used on the PCs.)

Table of Contents