LevelOne WAP-0005 User Manual page 67

Data - Status Screen
Access Point
Access Point Name
MAC Address
Domain
Firmware Version
TCP/IP
IP Address
Subnet Mask
Gateway
DHCP Client
Wireless
SSID
Channel/Frequency
Wireless Mode
AP Mode
Bridge Mode
Security Profiles
Name
SSID
Status
Buttons
Statistics
Profile Status
Log
Stations
The current name will be displayed.
The MAC (physical) address of the Wireless Access Point.
The region or domain, as selected on the Basic Wireless screen.
The version of the firmware currently installed.
The IP Address of the Wireless Access Point.
The Network Mask (Subnet Mask) for the IP Address above.
Enter the Gateway for the LAN segment to which the Wireless
Access Point is attached (the same value as the PCs on that LAN
segment).
This indicates whether the current IP address was obtained from a
DHCP Server on your network.
It will display "Enabled" or "Disabled".
The current SSID.
The Channel currently in use is displayed.
The current mode (e.g. 802.11g) is displayed.
The current Access Point mode is displayed.
The current Bridge mode is displayed.
This displays the current name of each security profile.
This displays the SSID associated with the profile.
This indicates whether or not the profile is enabled.
Click this to open a sub-window where you can view Statistics on
data transmitted or received by the Access Point.
Click this to open a sub-window which displays further details
about each security profile.
Click this to open a sub-window where you can view the activity
log.
Click this to open a sub-window where you can view the list of
all current Wireless Stations using the Access Point.
Operation and Status
63