LevelOne WAP-0005 User Manual page 7

• Auto Update.
The Wireless Access Point can automatically update its firmware, by
downloading and installing new firmware from your FTP server.
•
Command Line Interface.
configuration. This provides the possibility of creating scripts to perform common
configuration changes.
• NetBIOS & WINS Support.
(Windows Internet Naming Service) allows the Wireless Access Point to easily fit into
your existing Windows network.
• Radius Accounting Support.
accounting data on Wireless clients.
• Syslog Support.
If you have a Syslog Server, the Wireless Access Point can send its log
data to your Syslog Server.
•
SNMP Support.
SNMP (Simple Network Management Protocol) is supported, allowing
you to use a SNMP program to manage the Wireless Access Point.
•
UAM Support. The Wireless Access Point supports UAM (Universal Access Method),
making it suitable for use in Internet cafes and other sites where user access time must be
accounted for.
•
WDS Support. Support for WDS (Wireless Distribution System) allows the Wireless
Access Point to act as a Wireless Bridge. Both Point-to-Point and Multi-Point Bridge
modes are supported.
If desired, the command line interface (CLI) can be used for
Support for both NetBIOS broadcast and WINS
If you have a Radius Server, you can use it to provide
Introduction
3