Command Reference - LevelOne WAP-0005 User Manual

11g poe wireless access point

Hide thumbs Also See for WAP-0005:

Table of Contents

4. Use the "Connect" command to start the connection.

5. You will be prompted for a user name and password.

Enter the current user name and password for the AP you are connecting to.

The default values are admin for the User Name, and password for the Password.

6. You will then see the prompt, and can then use any of the commands listed in the

following Command Reference.

Command Reference

The following commands are available.

? -- Display CLI Command List

admin-- Temporary factory admin

boot flash -- Boot from flash

boot ethernet -- Boot from network

cp -- Copy file

config wlan-- config wlanX

connect bss-- connect to bssX

del acl -- Delete Access Control List

del key -- Delete Encryption key

find bss -- Find BSS

find channel

-- Find Available Channel

find all -- Find All BSS

format

-- Format flash filesytem

Figure 69: CLI Port Settings

Appendix C - Windows TCP/IP

Table of Contents