Using Wpa-802.1X - LevelOne WAP-0005 User Manual

Wireless Access Point User Guide

Using WPA-802.1x

This is the most secure and most complex system.
802.1x mode provides greater security and centralized management, but it is more complex to
configure.
Wireless Station Configuration
For each of the following items, each Wireless Station must have the same settings as the
Wireless Access Point.
On each PC, the mode must be set to Infrastructure.
Mode
SSID (ESSID) This must match the value used on the Wireless Access Point.
The default value is wireless
Note! The SSID is case sensitive.
802.1x Each client must obtain a Certificate which is used for authentication for
Authentication the Radius Server.
Typically, EAP-TLS is used. This is a dynamic key system, so keys do
802.1x
Encryption NOT have to be entered on each Wireless station.
However, you can also use a static WEP key (EAP-MD5); the Wireless
Access Point supports both methods simultaneously.
Radius Server Configuration
If using WPA-802.1x mode, the Radius Server on your network must be configured as follow:
•
It must provide and accept Certificates for user authentication.
•
There must be a Client Login for the Wireless Access Point itself.
•
The Wireless Access Point will use its Default Name as its Client Login name.
(However, your Radius server may ignore this and use the IP address instead.)
•
The Shared Key, set on the Security Screen of the Access Point, must match the
Shared Secret value on the Radius Server.
•
Encryption settings must be correct.
44