Wireless Access Points - LevelOne WAP-0005 User Manual

Wireless Access Point User Guide

Wireless Access Points

The main panel displays a list of all Wireless Access Points found on the network. For each
Access Point, the following data is shown:
Server Name The Server Name is shown on a sticker on the base of the device.
IP address The IP address for the Wireless Access Point.
MAC Address The hardware or physical address of the Wireless Access Point.
IEEE Standard The wireless standard or standards used by the Wireless Access Point
(e.g. 802.11b, 802.11g)
FW Version The current Firmware version installed in the Wireless Access Point.
Any extra information for the Wireless Access Point, entered by the
Description
administrator.
Note: If the desired Wireless Access Point is not listed, check that the device is installed and
ON, then update the list by clicking the Refresh button.
Buttons
Refresh
Detail Info
Web Management
Set IP Address
Exit
Click this button to update the Wireless Access Point device listing
after changing the name or IP Address.
When clicked, additional information about the selected Access
Point will be displayed.
Use this button to connect to the Wireless Access Point's Web-
based management interface.
Click this button if you want to change the IP Address of the
Wireless Access Point.
Exit the Management utility program by clicking this button.
10