Log Settings (Syslog) - LevelOne WAP-0005 User Manual

Log Settings (Syslog)

If you have a Syslog Server on your LAN, this screen allows you to configure the Access Point
to send log data to your Syslog Server.
Data - Log Settings Screen
Syslog Server
Syslog Server Address
Minimum Severity Level
Figure 56: Log Settings (Syslog) Screen
Select the desired Option:
•
Disable - Syslog server is not used.
•
Broadcast - Syslog data is broadcast. Use this option if
different PCs act as the Syslog server at different times.
•
Send to specified Syslog Server - Select this if the same
PC is always used as the Syslog server. If selected, you
must enter the server address in the field provided.
Enter the name or IP address of your Syslog Server.
Select the desired severity level. Events with a severtiy level
equal to or higher (i.e. lower number) than the selected level
will be logged.
Other Settings & Features
75