LevelOne WAP-0005 User Manual page 74

Wireless Access Point User Guide
Data - Admin Login Screen
Login
User Name
Change Admin Password
New Password
Repeat New Password
Admin Connections
Allow Admin connections
via wired Ethernet only
Enable HTTP
HTTP Port Number
Enable HTTPS
HTTPS Port Number
Enable Telnet
Enter the login name for the Administrator.
If you wish to change the Admin password, check this field
and enter the new login password in the fields below.
Enter the desired login password.
Re-enter the desired login password.
If checked, then Admin connections via the Wireless interface
will not be accepted.
Enable this to allow admin connections via HTTP. If enabled,
you must provide a port number in the field below. Either
HTTP or HTTPS must be enabled.
Enter the port number to be used for HTTP connections to this
device. The default value is 80.
Enable this to allow admin connections via HTTPS (secure
HTTP). If enabled, you must provide a port number in the
field below. Either HTTP or HTTPS must be enabled.
Enter the port number to be used for HTTPS connections to
this device. The default value is 443.
If desired, you can enable this option. If enabled, you will able
to connect to this AP using a Telnet client. You will have to
provide the same login data (user name, password) as for a
HTTP (Web) connection.
70