Security Features; Advanced Features - LevelOne WAP-0005 User Manual

Wireless Access Point User Guide
Point) Bridge modes are supported.
And you can even use both Bridge Mode and Access Point Mode simultaneously!
•
Client/Repeater Access Point.
Repeater Access Point, sending all traffic received to another Access Point.
•
Simple Configuration.
quickly and easily.
• DHCP Client Support.
address to PCs and other devices upon request. The Wireless Access Point can act as a
DHCP Client, and obtain an IP address and related information from your existing DHPC
Server.
•
Upgradeable Firmware.
easily, using only your Web Browser.

Security Features

• Security Profiles.
Security Profiles. Up to 8 Security profiles can be defined, and up to 4 used as any time.
•
Multiple SSIDs.
Because each Security Profile has it own SSID, and up to 4 Security
Profiles can be active simultaneously, multiple SSIDs are supported. Different clients can
connect to the Wireless Access Point using different SSIDs, with different security
settings.
• Multiple SSID Isolation.
can be isolated from each other.
• VLAN Support.
The 802.1Q VLAN standard is supported, allowing traffic from
different sources to be segmented. Combined with the multiple SSID feature, this provides
a powerful tool to control access to your LAN.
• WEP support.
Support for WEP (Wired Equivalent Privacy) is included. Both 64 Bit
and 128 Bit keys are supported.
• WPA support.
Support for WPA is included. WPA is more secure than WEP, and
should be used if possible. Both TKIP and AES encryption methods are supported.
•
802.1x Support.
Support for 802.1x mode is included, providing for the industrial-
strength wireless security of 802.1x authentication and authorization.
• Radius Client Support.
Server (as a Radius client).
• Radius MAC Authentication.
MAC addresses by using a Radius Server.
• Rogue AP Detection.
Access Points on your LAN.
•
Access Control.
The Access Control feature can check the MAC address of Wireless
clients to ensure that only trusted Wireless Stations can use the Wireless Access Point to
gain access to your LAN.
• Password - protected Configuration
prevent unauthorized users from modifying the configuration data and settings.

Advanced Features

• Auto Configuration.
copying the configuration data from another Access Point. This feature is disable by
default. Please enable this function according to your need.
The Wireless Access Point can operate as a Client or
If the default settings are unsuitable, they can be changed
Dynamic Host Configuration Protocol provides a dynamic IP
Firmware is stored in a flash memory and can be upgraded
For maximum flexibility, wireless security settings are stored in
If desired, PCs and devices connecting using different SSIDs
The Wireless Access Point can login to your existing Radius
You can centralize the checking of Wireless Station
The Wireless Access Point can detect unauthorized (Rouge)
. Optional password protection is provided to
The Wireless Access Point can perform self-configuration by
2