LevelOne WAP-0005 User Manual page 92

11g poe wireless access point

Hide thumbs Also See for WAP-0005:

Table of Contents

Wireless Access Point User Guide

3. Select the network card for your LAN.

4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify

an IP Address, as explained below.

Obtain an IP address from a DHCP Server

This is the default Windows setting. This is the default Windows settings. To work correctly,

you need a DHCP server on your LAN.

Using "Specify an IP Address"

If your PC is already configured for a fixed (specified) IP address, no changes are required.

(The Administrator should configure the Wireless Access Point with a fixed IP address from

the same address range used on the PCs.)

Table of Contents