Table of Contents
Advertisement
Configuration
1.
2.
96
Figure 3-69
Text-In Device (VP Filter) Settings Screen
Figure 3-70
Text-In Device (Generic Text and EPSON-POS) Settings
Highlight the field beside Port and press
RS485, and USB-Serial (1~8). The Setup field becomes active.
Note
If you have set the Port as None, you cannot make any changes
to the screen.
Note
When using the USB to serial text-in device, do NOT remove the
USB cable from the port while the system is running.
Highlight Setup... and press
Screen
. The Port Setup screen appears.
. Select from None, RS232C,
Advertisement
Table of Contents
