Digits Command - Keithley 2010 User Manual

5-46 SCPI Command Reference

:DIGits command

:DIGits <n>
[:SENSe[1]]:CURRent:AC:DIGits <n>
[:SENSe[1]]:CURRent[:DC]:DIGits <n>
[:SENSe[1]]:VOLTage:AC:DIGits <n>
[:SENSe[1]]:VOLTage[:DC]:DIGits <n>
[:SENSe[1]]:RESistance:DIGits <n>
[:SENSe[1]]:FRESistance:DIGits <n>
[:SENSe[1]]:PERiod:DIGits <n>
[:SENSe[1]]:FREQuency:DIGits <n>
[:SENSe[1]]:TEMPerature:DIGits <n>
Parameters
Query
Description
<n> = 4 3
5 4
6 5
7 6
8 7
DEFault 5
6
7
MINimum 3
FREQ, PER
MAXIMUM 6
dryckt is on
7
:DIGits? Query selected resolution
:DIGits? DEFault Query *RST default resolution
:DIGits? MINimum Query minimum allowable resolution
:DIGits? MAXimum Query maximum allowable resolution
These commands are used to select display resolution for the specified
measurement function.
Even though the parameters for this command are expressed as integers (4 to
7), you can specify resolution using real numbers. For example, to select
3 digit resolution let <n> = 3.5, for 4
Internally, the instrument rounds the entered parameter value to the nearest
integer.
Specify resolution for ACI
Specify resolution for DCI
Specify resolution for ACV
Specify resolution for DCV
Specify resolution for Ω2
Specify resolution for Ω4
Specify resolution for PER
Specify resolution for FREQ
Specify resolution for TEMP
digits
digits
digits
digits
digits
digits for ACI and ACV
digits for TEMP, FREQ, PER
digits for DCI, DCV, Ω2, Ω4
digits for ACI, ACV, DCI, DCV, Ω2, Ω4, TEMP,
digits for ACI, ACV, TEMP, FREQ, PER, Ω4 if
digits for DCI, DCV, Ω2, Ω4
digit let <n> = 4.5, and so on.