Keithley 2010 User Manual page 153

5-16 SCPI Command Reference
Table 5-6 (cont.)
SENSe command summary
Command
[:SENSe[1]]
:TEMPerature
:FRTD
:TYPE <name>
:TYPE?
:RZERo <NRf>
:RZERo?
:ALPHa <NRf>
:ALPHa?
:BETA <NRf>
:BETA?
:DELTa <NRf>
:DELTa?
:FREQuency
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:PERiod
:THReshold
:VOLTage
:RANGe <n>
:RANGe?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:DIODe
:CURRent
:RANGe
[:UPPer] <NRf>
[:UPPer]?
Description
Path to configure FRTD sensor.
Select FRTD sensor type (PT100, D100, F100, PT3916,
PT385, USER)
Query FRTD sensor type.
Specify RZERo value (0 to 10,000).
Query RZERo value.
Specify ALPHa value (0 to 0.01).
Query ALPHa value.
Specify BETA value (0 to 1.00).
Query BETA value.
Specify DELTa value (0 to 5.00).
Query DELTa value.
Path to configure frequency.
Path to select the threshold voltage range:
Select threshold range (0 to 1010).
Query threshold range.
Specify reference (0 to 1.5e7).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolution (4 to 7).
Query resolution.
Path to configure period.
Path to select the threshold voltage range:
Select threshold range (0 to 1010).
Query threshold range.
Specify reference (0 to 1).
Enable or disable reference.
Query state of reference.
Use input signal as reference.
Query reference value.
Specify measurement resolution (4 to 7).
Query resolution.
Paths to configure diode test:
Path to select range.
Select range (0 to 1e-3).
Query range.
Default
SCPI
parameter
PT100
100.00
0.00385
0.11100
1.50700
10
0
OFF
7
10
0
OFF
7
1e-3