Post-Installation - Avaya C360 Installation And Configuration Manual

Powering Up the Avaya C360

Post-Installation

The following indicate that you have performed the installation procedure correctly:
Table 12: Post-Installation Indications
Procedure
Powering the
C360
Creating
stacks
If you do not receive the appropriate indication, please refer to
Installation.
58 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Indication
All front panel function LEDs
●
illuminate briefly.
- If the PWR LED blinks once every 1
second, then the BUPS is active
and the main PSU is down.
The LINK, SYS and PWR LEDs light
●
The port LEDs flash
●
The LED next to the appropriate connection
("Cable to upper unit" or "Cable to lower
unit") is lit.
Troubleshooting
Information
Switch does not
power up on
page 201
Stacking not
functioning on
page 203
Chapter 12: Troubleshooting the