Weighted Queuing Cli Commands; Lldp Agent; Lldp Agent Overview - Avaya C360 Installation And Configuration Manual

Avaya C360 Layer 2 Features
When the Priority scheme is set to "Strict", the Lower priority queue will transmit only if
●
none of the Higher priority queues has nothing to transmit.
When the Priority scheme is set to "WRR" queues will be transmit according to the weight
●
factor.
Tip:
By default, the WWR weights between the four C360 priority queues are
Tip:
1:4:16:64

Weighted Queuing CLI Commands

The following table contains a list of the CLI commands for the Weighted Queuing feature. The
rules of syntax and output examples are all set out in detail in the Reference Guide for the
Avaya C360 Converged Stackable Switch, 10-300506.
In order to...
Switch between the Strict and
Weighted queuing schemes, and
to set the weights
Returns the queuing scheme to
WRR with the default weights
Display the current queuing
scheme settings

LLDP Agent

LLDP Agent Overview

IEEE 802.1AB Link Layer Discovery Protocol (LLDP) simplifies troubleshooting of enterprise
networks and enhances the ability of network management tools to discover and maintain
accurate network topologies in multi-vendor environments. It defines a set of advertisement
messages, called TLVs, a protocol for transmitting and receiving the advertisements, and a
method for storing the information contained in the received advertisements.
The LLDP protocol allows stations attached to a LAN to advertise information about the system
(such as its major capabilities and its management address) and information regarding the
station's point of attachment to the LAN (port ID and VLAN information) to other stations
146 Installation and Configuration Guide Avaya C360 Multilayer Stackable Switches, version 4.5
Use the following command...
set queuing scheme
set default queuing scheme
show queuing scheme