Mac Security Cli Commands - Avaya C360 Installation And Configuration Manual

currently learnt on this port are preserved and considered as secure MAC, unless they are
removed using clear secure mac command. Individual secure MACs can also be added.
Tip:
You can add a MAC address to more than one port on the device. This allows a
Tip:
specific device to communicate with the switch via more than one ingress port.
However the number of secured MAC addresses on any module cannot exceed
1,024.
Note:
Ports that are members of a port redundancy scheme should not be also
Note:
configured as secure ports.

MAC Security CLI Commands

The following table contains a list of CLI commands for the MAC Security feature. The rules of
syntax and output examples are all set out in detail in the Reference Guide for the Avaya C360
Converged Stackable Switch, 10-300506.
In order to...
Enable/Disable MAC security for
the switch
Display the MAC security mode
for the switch
Enable/Disable MAC security for
a specific port
Display the MAC security mode
for a port
Specify the action taken when
there is a security violation
Add a MAC address to a port's
list of allowed MAC addresses
Remove a MAC address from a
port's list of allowed MAC
addresses
Display a port's list of allowed
MAC addresses
Use the following
command...
set security mode
show security mode
set port security
show port security
set security violation action
set secure mac
clear secure mac
show secure mac
MAC Security
Issue 1 July 2006 133