Printer Isn't In The Chooser - Xerox Phaser 840 Service Manual

Printer isn't in the Chooser

Ensure that the printer is turned on and the rear panel health light is flashing at a
1.
regular rate.
Check the Network or AppleTalk control panel to ensure the proper network or zone
2.
is selected.
Power-cycle the printer.
3.
Check to see if the printer has not been renamed or placed in another zone. You can
4.
print a Configuration Page, which lists this EtherTalk information as well as other
information about the printer.
Verify the EtherTalk settings on the printer's Configuration Page.
5.
Verify that the printer is correctly cabled to the network and that the Ethernet cable
6.
functions properly.
Locate and remove and Windows NT shared printers that have captured the AppleTalk
7.
queue for the printer.
Verify the driver version for the built-in Ethernet port on a Macintosh G3.
8.
Reset the printer's NVRAM settings.
9.
Disable QuickDraw GX.
10.
3 - 116
Phaser 840/850/860/8200 Color Printer - Service Manual