Check Menu Value Keys And Descriptions (Phaser 860 Only) - Xerox Phaser 840 Service Manual

Table 4-3 Diagnostic Menu Map
Clear Fault History *
Clear PS NVRAM *
Clear PE NVRAM *
Set PE NVRAM to Defaults * Set Engine NVRAM parameters to factory default.
Switch to External Diags *
* These items are are available in the service diagnostic menus and not available in custormer
diagnostic mode.
Check Menu Value Keys and Descriptions
(Phaser 860 only)
Refer to the tables associated with each test for their normal operating ranges, the 'R'
values, and the suggested troubleshooting steps if the test results exceed the given
range(s). In cases where insufficient baseline data is available, the results have been left
blank. All results from tests that move paper through the printer were collected using 24 lb
bond paper.
Collecting 2 or 3 samples of the test data is recommended before deciding on a
Note:
course of action. Many of the tests rely on mechanical positions and slight changes can
effect the results. Ensure that the printer is not out of paper, ink or maintenance kit life.
The diagnostics routines are not designed to address all of these conditions consistently.
4 - 126 Phaser 840/850/860/8200 Color Printer - Service Manual
Erase the fault history.
Clear the PostScript NVRAM parameters.
Clear the Engine NVRAM parameters.
Enable external diagnostics. Requires Phaser 860
diagnostics software.