Exit Roller Drive Belt Tension Adjustment - Xerox Phaser 840 Service Manual
With phaser 8200 color printer addendum
Hide thumbs
Also See for Phaser 840:
- Service manual (11 pages) ,
- Supplementary manual (11 pages) ,
- Repacking manual (50 pages)
Table of Contents
Advertisement
Exit roller drive belt tension adjustment
Turn off the printer and remove the left-side cabinet panel.
1.
To adjust the belt tension, loosen the exit roller drive belt tensioner. With a spring
2.
scale, press downward on the idler tensioner of the exit roller drive belt with a pressure
of 0.5 kg (1 lb.) then tighten the tensioner in place. Do not over-tension the belt.
Reinstall the left side panel.
3.
Advertisement
Table of Contents
Troubleshooting
