Xerox Phaser 840 Service Manual page 50

Table 1-11 Electrical specifications
Characteristic
RF emissions
Table 1-12 Environmental specifications
Characteristic
Temperature
Operating
Storage and shipping
Humidity
Operating
Non-operating
Altitude
Operating
Non-operating
Vibration/shock
Non-Operating
(vibration)
Non-operating (shock)
Operating (shock)
1 - 34 Phaser 840/850/860/8200 Color Printer - Service Manual
Specification
Both 115 and 220 VAC-configured instruments pass these standards:
EC EN60950:1992 Safety of Information Technology Equipment
including Business Equipment
EC EN55022:1992 Limits and methods of measurement of radio
interference characteristic of Information Technology Equipment
EC EN50082-1:1997 The Generic Immunity Standard Residential,
Commercial, and Light Industry
EN61000-4-3:1995-02 RF Field Immunity
EN61000-4-2:1995-01 ESD (Electostatic Discharge)
EN61000-4-4:1995-01 Fast Burst Transient
EN61000-4-5:1995-02 Line Surge
EN61000-4-6:1996-03 RF conducted Immunity
EN61000-4-11:1994-06 Voltage Dips and Interruptions
EN61000-3-3:1994-12 Flicker
73/23/EEC Low Voltage Directive
89/336/EEC Electromagnetic Compatibility Directive
89/392/EEC Machinery Directive
Specification
°
10 to 32 C (50 to 90
°
-30 to 60 C (-22 to 140
10 to 80% relative humidity, non-condensing
10 to 95% relative humidity, non-condensing
0 to 2400 m (8,000 ft.) at 25
0 to 15000 m (50,000 ft.)
Will withstand 0.15 G excitation, 5 to 200 Hz, 3 axes for up to
7 minutes with no impairment or subsequent damage.
0.5 g, 25 minute sweep, 5-200-5 Hz, 100-200 sec/sweep cycles.
The printer may have any corner raised and dropped 1.5 cm (0.6 in.)
while printing is in progress, without impairment of operation that
cannot be recovered by a printhead purge cycle. The printer may
have any corner raised and dropped 6 cm (2.4 in.) while idle without
subsequent impairment of operation.
°
F)
°
F)
°
C