Xerox Phaser 840 Service Manual page 49

Table 1-10 Functional specifications
Characteristic
Usable envelopes
Specialty Media
Table 1-11 Electrical specifications
Characteristic
Primary line voltages
Primary voltage
frequency range
Power consumption
Current rating
Fusing
Secondary voltages
Specification
#10 (U.S.)
#6 3/4 (U.S.)
C5 (Metric)
US Monarch (Phaser 850/860 printer only)
Note: Do not use envelopes with endflaps (except Choukei 3 &
4 Gou), plastic windows or metal clasps; they can damage the
printer.
Labels : A/A4 laser quality sheet stock only, Recommended Avery®
white laser labels:
Phaser 840/850/860 use: Tek-branded labels.
The Phaser 840 also supports: U.S.: 5160, 5960 and Metric: L7162.
The Phaser 840/850/860 also support:
Glossy, Photo, Cover stock and Transparencies
Specification
87 to 132 VAC (115 VAC nominal)
174 to 264 VAC (220 VAC nominal)
Input voltage range is auto-sensed.
47 to 63 Hz
200 watts standby; 300 watts at idle; 600 watts during printing.
Maximum power consumption 1000 watts during warm-up.
115 VAC configuration – 8 amp max./1 amp min.
220 VAC configuration – 4 amp max./1 amp min.
F1: DC switcher – 6.3 amp slo-blo
F2: Drum heater 1, reservoir heater 1, ink melt chambers,
cap/wipe/purge unit – 10 amp slo-blo
F3: Jet stack left and right, paper pre-heaters, reservoir heaters 2,
3,and 4 – 10 amp slo blo
Fuses are not user-accessible.
+5V ± 2.5%
+12 V ± 5%
-12 V ± 5%
+40 V -5%, +12%
-52 V ± 10%
+54 V ± 10%
DL (Metric)
Choukei 3 Gou
Choukei 4 Gou
General Information 1 - 33