Repeating Print Defects On Print; Repeating Print Defects On The Print - Xerox Phaser 840 Service Manual

Repeating print defects on print

Table 3-21 Repeating print defects on the print
Step Question and Actions
Repeating defect 13.6 cm (5.34 in.) are caused by the transfix roller. Clean the
1
transfix roller.
If the problem persists, replace the transfix assembly.
2
A single repeating defect on the page is probably due to a defect on the drum.
3
Replace Drum transfix assembly.
4
The distance between each artifact of a
repeating image defect reveals which
imaging component is causing the
defect.
0388-54
Troubleshooting 3 - 103