Avaya


Definity Quick Reference Manual page 39

Feature operation
To use Loudspeaker Paging with paging buttons:
1. Press an idle paging zone button. If the desired paging zone is already in
use (the associated lamp is on), select another zone or wait for that zone to
become idle (the associated lamp is off).
2. Speak into the handset to make the announcement.
3. Press the
To use Loudspeaker Paging with trunk access codes:
1. Press the
2. Dial the trunk access code for the zone you wish to page.
3. Speak into the handset to make the announcement.
4. Press the
The lamp for the selected paging zone goes on.
If the button is selected, all paging zone lamps go on.
PAGE ALL
The announcement was heard in the selected zone(s). If the
announcement lasted too long, you will hear intercept tone; release
the button and try again.
button.
RELEASE
button or an idle call appearance button.
START
You hear a dial tone.
The call appearance lamp goes on.
The Position Available lamp goes off.
If you hear confirmation tone, continue with
If you hear busy tone, the zone is not available; press the
button and try again later.
The announcement was heard in the selected zone(s). If the
announcement lasted too long, you will hear intercept tone; try again
with a shorter announcement.
button.
RELEASE
Step 3.
CANCEL
Issue 4 July 2001 35