Avaya


Definity Quick Reference Manual page 21

Basic operation
3. After the person answers, press the
the original call and the new call.
4. Use one of the following steps (a, b, c, or d) to complete the call.
a. To set up a 3-way connection, press the
b. To transfer the call, press the
The Split Swap lamp goes on and stays on as long as you alternate
between calls.
You and the other two callers are connected.
The Split lamp goes on.
The display shows a conference call in progress.
The Split Swap lamp goes off and the button can no longer be
used for this call.
To drop out of the 3-way connection, press the
You are disconnected from the call.
The Split lamp goes off.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
together), then the
RELEASE
You are disconnected from the call.
The Split lamp goes off.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
button to alternate between
SPLIT SWAP
button.
SPLIT
RELEASE
button (this joins all three parties
SPLIT
button.
Issue 4 July 2001 17
button.