Basic operation
To make calls not using the selector console:
1. Press the
2. Dial the extension.
3. To end the call, press the
You are disconnected from the call.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
NOTE:
Before the call completes, you can press the
button to end the call attempt. If you press
dial tone. If you press
RELEASE
operating mode.
button or an idle call appearance button.
START
You hear a dial tone.
The call appearance lamp goes on.
The Position Available lamp goes off.
You hear a ringback tone.
The display shows the dialed number.
The ringback tone stops when the called party answers.
RELEASE
You are disconnected from the call.
The call appearance lamp goes off.
The display goes blank.
The Position Available lamp goes on.
The console returns to the normal operating mode.
NOTE:
Before the call completes, you can press the
button to end the call attempt. If you press
dial tone. If you press
RELEASE
operating mode.
CANCEL
, you get another
CANCEL
, the console returns to the normal
button.
CANCEL
, you get another
CANCEL
, the console returns to the normal
Issue 4 July 2001 13
or
RELEASE
or
RELEASE