System Fan Assembly; Removing The System Fan Assembly - HP xw4600 Service And Technical Reference Manual

3. Remove the four screws from the back panel (1).
Figure 4-19
4. Slide the power supply toward the front of the chassis and lift it out of the chassis (2).
NOTE: To replace the power supply, reverse the previous steps.

System fan assembly

This section describes how to remove the system fan assembly.

Removing the system fan assembly

To remove the system fan assembly:
1. Disconnect power from the system
access panel
74 Chapter 4 Removal and replacement procedures
Removing the power supply
(Predisassembly procedures on page
(Removing the side access panel on page
58) and remove the side
64).
ENWW