Energy Star - HP xw4600 Service And Technical Reference Manual

ENERGY STAR

HP computers marked with the ENERGY STAR logo are compliant with the applicable U.S.
Environmental Protection Agency (EPA) ENERGY STAR specifications for computers. The EPA
ENERGY STAR logo does not imply endorsement by the EPA. As an ENERGY STAR Partner, Hewlett-
Packard Company has determined the products marked with the ENERGY STAR logo are ENERGY
STAR qualified per the applicable ENERGY STAR guidelines for energy efficiency. The following logo
appears on all ENERGY STAR qualified computers.
Figure 1-7
The ENERGY STAR Computers Program was created by the EPA to promote energy efficiency and
reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way
products achieve this energy efficiency is by reducing power consumption when not being used through
the Microsoft Windows Power Management feature.
The Power Management feature enables the workstation to enter a low-power (or "sleep") mode after
a period of inactivity. When used with an external monitor that is ENERGY STAR compliant, this feature
also supports the monitor's similar power management features.
To take advantage of this energy savings:
●
The Power Management feature has been preset to power down the computer after 30 minutes of
inactivity.
●
The Power Management feature has been preset to power down the monitor after 15 minutes of
inactivity.
Both the computer and monitor can be woken from "sleep" mode through user interaction with any of
the computer input devices (mouse, keyboard, and so on). When configured with Wake On LAN (WOL)
enabled, the workstation can also be awoken by a network signal.
See the EPA ENERGY STAR Power Management Web site for more information about the energy and
financial savings potential of the Power Management Feature:
powermanagement.
See the EPA ENERGY STAR Web site for more information about the ENERGY STAR program and
its environmental benefits: http://www.energystar.gov.
CAUTION:
compliant can cause video distortion when an Energy Save timeout occurs.
NOTE: ENERGY STAR is not supported on Linux workstations.
If it is necessary to restore the operating system, you must also reset the ENERGY STAR settings (if
applicable) after the restore.
To verify the factory default power settings for your workstation, select Start>Control Panel and double-
click Power Options.
ENWW
ENERGY STAR logo
Using the Energy Save Monitor feature with monitors that are not ENERGY STAR
http://www.energystar.gov/

ENERGY STAR

13