Required DIMM installation order
Use the following illustration as a guide for installing memory:
●
If installing only one DIMM, it must be installed in socket (1).
●
The first DIMM pair must be installed in sockets (1) and (3).
●
The second DIMM pair must be installed in sockets (2) and (4).
Figure 4-22
Installing a memory module
To install a memory module:
1.
Disconnect power from the system
the side access panel
ENWW
Required DIMM installation order
(Removing the side access panel on page
(Predisassembly procedures on page
Removing and replacing components
58), and then remove
64).
77