HP xw4600 Service And Technical Reference Manual page 42

Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
Heading
34 Chapter 3 System management
Option
finished). The POST delay also gives you more time to select F10 to enter the Computer
Setup (F10) Utility.
● Limit (CPUID Maximum Value to 3) (Enable/Disable)
Execute Tests workstation memory. The workstation reboots, and any changes that have been made are
Memory Test lost. The workstation might boot with memory in a sub optimal configuration.
BIOS Power-On Enables you to disable or specify a weekday and time for BIOS power-on.
Onboard Enables you to set resources for or disable onboard system devices such as serial ports, parallel
Devices ports, and diskette controllers. Operating system parameters generally override Onboard Devices
settings.
PCI Devices Enables you to set the IRQ for or disable the following devices during POST:
● Intel USB controllers
● Intel HD audio device
●
Intel RAID controller
●
nVidia VGA controller
● Broadcom Ethernet controller
Operating system parameters generally override PCI Devices settings.
Available IRQ values are 5, 10, and 11.
Bus Options The options are:
●
PCI SERR# Generation (Enable/Disable)
●
PCI VGA Palette Snooping (Enable/Disable)
●
ECC Support (Enable/Disable)
Device Options ● Printer Mode (EPP + ECP, Output-Only, Bi-Directional)
●
Num Lock State at Power-On (On or Off)
●
S5 Wake-on-LAN (Enable or Disable)
● Multi-Processor-Turns multi-core function to single-core
● Internal Speaker (Enable or Disable)
●
Monitor Tracking (Enable or Disable)
●
NIC PxE Option ROM Download (Enable or Disable)
● SATA RAID Option ROM Download (Enable or Disable)
Slot 1 (PCI Slot 1 option ROM download (Enable/Disable)
Express x 1)
Slot 2 (PC Slot 2 option ROM download (Enable/Disable) and latency timer.
Express x16)
Slot 3 (PCI Slot 3 option ROM download (Enable/Disable).
Express 4)
Slot 4 (PCI Slot 4 option ROM download (Enable/Disable).
Express x16)
Description
ENWW