Table 4-5
Workstation component disassembly order (continued)
Security lock (Padlock loop) (optional)
If a security padlock is installed on your workstation, remove it before servicing the workstation.
Removing the security lock
To remove the padlock, unlock it and slide it out of the padlock loop as shown in the following figure.
Figure 4-3
Cable lock (optional)
If a cable lock is installed on your workstation, remove it before servicing the workstation.
62
Chapter 4 Removal and replacement procedures
Hard drives
(SAS hard drive
on page
96),
on page
99)
Processor heatsink
on page
103)
Battery
(Battery
on page
87)
Removing the security lock
SATA hard drive
(Processor heatsink
Processor
(System
processor on page
105)
System board
on page
107)
(System board
ENWW