Removing The Front Bezel; Replacing The Front Bezel; Bezel Blanks; Removing Bezel Blanks - HP xw4600 Service And Technical Reference Manual

Removing the front bezel

To remove the front bezel:
1. Lift the two release snaps located on the front bezel (1).
Figure 4-11
2. Rotate the front bezel away from the chassis to remove the bezel (2).

Replacing the front bezel

To replace the front bezel, align front bezel on the bottom and rotate in until it snaps into place.

Bezel blanks

This section describes how to remove bezel blanks

Removing bezel blanks

To remove bezel blanks:
1. Disconnect power from the system
bezel (Removing the front bezel on page
68 Chapter 4 Removal and replacement procedures
Removing the front bezel
(Predisassembly procedures on page
68).
58) and remove the front
ENWW