2D Structured Append; 2D Normal/Inverse Symbol Control - Datalogic QuickScan I QD2400 Product Reference Manual

2D Structured Append

Enables/disables ability of reader to append multiple 2D Codes labels in a structured format. The structured
append property is globally applied to the following symbologies, if these are enabled:
DEFAULT
$CDESA01(CR)
Structured Append = Enable

2D Normal/Inverse Symbol Control

Specifies the options available for decoding normal/negative printed 2D symbols. This configuration item applies
globally to all the 2D symbologies that support that feature according to Standard AIM Specification: Data Matrix,
QR, MicroQR, Aztec and Chinese Sensible Code.
To decode all symbologies, including linear symbologies, refer to
DEFAULT
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
Symbology Selection
Product Reference Guide
• Data Matrix
• QR Code
Enter/Exit Programming Mode
• Aztec
• PDF 417
$CDESA00(CR)
Structured Append = Disable
"Decode Negative Image" on page 78
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
D
175