2D Structured Append; 2D Normal/Inverse Symbol Control - Datalogic Gryphon Series Product Reference Manual

2D Global Features

2D Structured Append

Enables/disables ability of reader to append multiple 2D Codes labels in a structured format.
The structured append property is globally applied to the following symbologies, if these are
enabled:
•
•
DEFAULT
$CDESA01(CR)
Structured Append = Enable

2D Normal/Inverse Symbol Control

Specifies the options available for decoding normal/negative printed 2D symbols. This
configuration item applies globally to all the 2D symbologies that support that feature
according to Standard AIM Specification: Data Matrix, QR, MicroQR, Aztec and Chinese
Sensible Code.
To decode all symbologies, including linear symbologies, refer to
page 106D Symbology Selection
DEFAULT
$CIPNR01(CR)
Normal/Inverse Symbol Control = Inverse
Product Reference Guide
Data Matrix • Aztec
QR Code • PDF 417
Enter/Exit Programming Mode
$CDESA00(CR)
Structured Append = Disable
"Decode Negative Image" on
$CIPNR00(CR)
Normal/Inverse Symbol Control = Normal
$CIPNR02(CR)
Normal/Inverse Symbol Control =
Both Normal and Inverse
203