Table of Contents
Advertisement
CTCSS/DCS/EPCS B
P
Three User Beep Memories are provided, allowing you to create unique original beep
tone melodies.
Each User Beep Memory can store up to 64 steps with three octaves ("C1" through "B3").
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 12: BEEP
MELODY.
3. Press the
Mode Item.
4. Rotate the DIAL knob to select the memory slot into which
you wish to store your programmed beep melody. Avail-
able selections are 1, 2, and 3. The previously stored beep
melody will be displayed.
5. Press the
key to enable programming the beep melody.
Press and hold the
previous beep melody, if desired.
6. Rotate the DIAL knob to select the first beep tone of the
User Beep Melody. Available selections are C1 - B3, and
POS (rest).
7. Press the
length of the first beep tone. Available selections are 10ms
(10 msec) - 2500ms (2.5 sec).
8. Press the
Beep Melody.
9. If you make a mistake, press the
cursor, then re-enter the correct beep tone or length.
10. Repeat steps 6 - 9 until you have completed the User Beep
Melody.
11. When there is a beep tone, which you wish to delete, bring
the cursor to that beep tone using the
press the
key repeatedly until the "SELECT" notation in
the "Operation Mode" slot turns into "DELETE". Now, press
and hold in the
C1
D1
E1
F1
VX-8DR/DE O
CTCSS/DCS/EPCS O
U
M
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
key for one second to clear any
key, then rotate the DIAL knob to set the
key to accept the first beep tone of the User
key for one second to delete that beep tone.
G1
A1
B1
C2
D2
M
O
key to back-space the
/
key, then
E2
F2
G2
A2
B2
PERATION
Step
Operation Mode
Beep Tone
Memory Slot
Tone Length
C3
D3
E3
F3
G3
A3
B3
43
Advertisement
Table of Contents
