Table of Contents
Advertisement
S
M
I
88: SMART SEARCH
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE / CONTINUOUS
Default: SINGLE
SINGLE:
The transceiver sweeps the current band once in each direction starting
on the current frequency. All channels where activity is present (up to
15 in each direction) are loaded into the Smart Search memories. Whether
or not all 31 memories are filled, the search stops after one sweep in
each direction.
CONTINUOUS: The transceiver makes a sweep in each direction as with the "SINGLE"
mode, but if all 31 channels are not filled after the first sweep, the radio
continues sweeping until they are all filled.
S
M
I
89: S-METER SYMBOL
Function: Selects the S- & TX PO meter Symbol.
Available Values: Four patterns (
Default:
S
M
I
90: SPEAKER OUT
Function: Enables/Disables the FM Broadcast audio output to the internal speaker when
using the earphone antenna.
Available Values: AUTO / SPEAKER
Default: AUTO
AUTO:
The FM Broadcast audio output is selected automatically depending on the
connection of the earphone antenna.
SPEAKER: Routes the FM Broadcast audio output to the internal speaker and the ear-
phone.
S
M
I
91: SPEC-ANALYZER
Function: Selects the Spectrum Analyzer sweep mode.
Available Values: 1Time / CONTINUOUS / Full Time
Default: 1time
1Time:
The receiver sweeps the current band once.
CONTINUOUS: The receiver sweeps the current band repeatedly until the Spectrum Ana-
lyzer is turned off.
Full Time:
This mode is activated similar to a "Continuous" mode. However, the
transceiver outputs audio on the center frequency ( ) through the speaker
when Spectrum Analyzer is activated.
VX-8DR/DE O
S
M
S
M
D
,
,
S
M
ET
ODE
, or
)
157
Advertisement
Table of Contents
