Table of Contents
Advertisement
I
C
NTERNET
FRG "F
You may access other Internet Link Systems (including WIRES
use a DTMF string for access.
P
Load the DTMF tones which you wish to use for Internet-link access into an Internet
Memory Register. For purposes of this example, we will use "#1101D" as the access code
of the W6DXC node.
1. Press and hold the
2. Rotate the DIAL knob to select Set Mode Item 45:
INTERNET SELECT.
3. Press the
Mode Item.
4. Rotate the DIAL knob to select the DTMF Memory register
("1" - "64") into which you wish to store the access code.
5. If you wish to attach an alpha/numeric name "Tag" to the
Internet Memory, proceed to the next step; otherwise press
the
key then skip to step 13.
6. Press the
name tag.
7. Rotate the DIAL knob to select the first digit of the desired
label.
8. Press the
9. If you make a mistake, press the
cursor, then re-enter the correct letter, number, or symbol.
10. Repeat steps 7 through 9 to program the remaining letters,
numbers, or symbols of the desired label. Eight characters
may be used in the creation of a label.
11. When you have programmed a label that is less than 8 char-
acters, press the
enable storing the access code; otherwise, just program the
8 character label and press the
12. Rotate the DIAL knob to select "#".
13. Press the
to the second digit of the DTMF string.
14. If you make a mistake, press the
cursor, then re-enter the correct letter or number.
15. Repeat steps 12 through 14 until you have completed the
access code ("#1101D").
112
ONNECTION
FRG
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
key briefly to enable programming of the
key to move to the next character.
key twice to confirm the label and
key briefly to accept the first digit and move
F
EATURE
R
G
key to back-space the
key one time.
key to backspace the
VX-8DR/DE O
" M
™
in the FRG mode) that
M
Advertisement
Table of Contents
