Epcs (Enhanced Paging & Code Squelch); Storing The Ctcss Tone Pairs For Epcs Operation - Yaesu VX-8DE Operating Manual

50/144/430 mhz triple-band heavy duty sumersible transceiver
Hide thumbs Also See for VX-8DE:
Table of Contents

Advertisement

CTCSS/DCS/EPCS O
EPCS E
The VX-8DR/DE includes an Enhanced CTCSS tone encoder/decoder and a dedicated
microprocessor providing paging and selective calling features. This allows you to place
a call to a specific station (Paging), and to receive calls of your choice directed only to you
(Code Squelch).
The paging and code squelch systems use two pairs of (alternately switched) CTCSS
tones which are stored in the pager memories. Basically, your receiver remains silent until
it receives the CTCSS tone pair that matches those stored in the Receiving Pager Memory.
The squelch then opens so the caller is heard, and the paging ringer immediately sounds,
if activated. When you close the PTT switch to transmit, the CTCSS tone pair that is
stored in the Transmitting Pager Memory will be transmitted automatically.
On the paged radio, the Code Squelch will close automatically after the incoming page
ends. Meanwhile, on the paging radio, the Enhanced Paging and Code Squelch system
will be disabled after the PTT switch is released after the paging transmission. You may
re-activate the Enhanced Paging and Code Squelch system again.
S
CTCSS T
1. Press and hold the
2. Rotate the DIAL knob to select Set
Mode Item 67: PAGER CODE-RX
for the Receiving CTCSS Tone
Pair or Set Mode Item 68: PAGER
CODE-TX for the Transmitting CTCSS Tone Pair.
3. Press the
Mode Item.
4. Rotate the DIAL knob to set the CTCSS Tone number which
corresponds to the first tone of the CTCSS Tone Pair.
5. Press the
tate the DIAL knob to set the CTCSS Tone number, which
corresponds to the second tone of the CTCSS Tone Pair.
6. Press the PTT switch to save the new setting and exit to
normal operation.
The VX-8DR does not recognize the order of the
1st tone and the 2nd tone. In other words, for ex-
ample, the VX-8DR/DE considers both CTCSS pairs
"10, 35" and "35, 10" to be identical.
40
P
key for one second to enter the Set Mode.
key briefly to enable adjustment of this Set
key (" " icon moves to the right), then ro-
PERATION
P
& C
EPCS O
VX-8DR/DE O
S
M

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vx-8dr

Table of Contents